For parked wheel restraint
Grip Wheel Chock Pair
Ground-contact equipment
Compare the stated purpose before placing any accessory below a loaded vehicle.
250 mm maximum tyre width
1,500 kg supported wheel load
Two chocks
Product details
A pair of ridged charcoal wheel chocks used with appropriate parking procedures to reduce rolling movement. Prepare a steady parking position by checking the load carried by each supported wheel and the usable contact width of the chosen ramp. Set the equipment on firm ground with the approach clear, then move slowly under guidance. Keep hands and feet away from tyres during positioning. These pieces are for parked-vehicle levelling or restraint as specified, not lifting a vehicle for maintenance. Recheck stability after settling and follow the vehicle manufacturer's parking procedure.
Fit and use
Check load per supported wheel and tyre width, not total vehicle mass alone. Use on firm level ground with suitable wheel restraints.
Care
Brush off grit, rinse with water and dry before storage. Inspect for cracks or distortion before every use and replace damaged pieces.